Autocad How to Copy and Paste Between Drawings TUTORIAL

Updated with AutoCAD 2017

Copying objects from one drawing to some other is a mutual task. You can utilise the Windows Clipboard and the drag-and-driblet methods.

When working with ii drawings open, choose View tab> Windows panel> Tile Vertically (or Horizontally) to view both drawings at the same fourth dimension.

Notation one : You lot tin can employ these techniques within a drawing equally well, simply the COPY command provides more options and accuracy.

Note 2: You may demand to clear your clipboard if having problem pasting latest copied object. (Correct click on Desktop – Brandish setting – Clipboard)

Use the Windows Clipboard to copy objects between drawings

Almost people know that they tin can copy objects in a drawing to the Windows Clipboard and and then paste those objects in another cartoon. But there are a couple of tricks to this process that can make your work go more quickly and provide more accurate results.

Of course, you tin can use the common Windows keyboard shortcuts:

• Ctrl+C to copy
• Ctrl+V to paste

When you use the simple copy-and-paste procedure, you don't take much command over the placement of your object in the second cartoon. That'due south considering this process uses the lower-left corner of the extents of the object as the base of operations point, which may non be useful. For example, here you lot run into this process with a circle.

As yous can run across, the base point isn't on the circle, making it difficult to place the circle accurately.

Therefore, AutoCAD provides you with ii special tools for copying and pasting.

The first is Re-create with Basepoint. Follow these steps:

• Hover the cursor over the object and correct-click to display the shortcut bill of fare. For multiple objects, select them first, and and then correct-click.

• Cull (Clipboard,) Copy with Base of operations Point. This is the COPYBASE command. Every bit you tin can come across in the figure, you can as well press Ctrl+Shift+C.
• At the Specify base of operations bespeak: prompt, use an object snap to specify the base point.
• Click in the other cartoon.
• Paste, using Ctrl+Five, or by clicking Paste on the Standard toolbar. You can too right-click and choose (Clipboard,) Paste from the shortcut carte.
• Your cursor is now at the base signal you specified, so you tin can accurately place the object. Specify the insertion point you want.

Here, the base of operations point was set to the eye of the circle.

## Dynamic block is another great productivity tip to master. Sign up below to get your Free tutorial on creating a complete dynamic block, including a drawing to exercise on. Yous'll make a movable chair, resizable desk, and more than.

The 2d useful tool is Paste to Original Coordinates. If you lot have ii drawings that are very like, you can use this characteristic to place the object at the same coordinates as in the original cartoon.

Just copy the object(s) to the Clipboard, and actuate the 2nd drawing. Then right-click and choose (Clipboard,) Paste to Original Coordinates.

If those coordinates are non in the electric current brandish, practice a Zoom Extents to see the pasted object.

Note: Nosotros receive few comments that "Paste to Original Coordinates" may not work on Mac computer. One of our followers (Cheers @Chilli ) provided the following piece of work around.

If you do not take the Clipboard carte pick of 'pasting to original coordinates', simply follow these steps.

1. Select elements in the proposed property drawing.
ii. Right click – clipboard>Copy with base point
three. Type in 0,0
4. Switch to destination drawing
5. Right-click on open expanse>clipboard>paste with base of operations point
six. Type in 0,0

And if the coordinate system is the aforementioned in both drawings, your elements should be located correctly.

Use drag-and-driblet to copy objects between drawings

Drag-and-driblet doesn't give yous the same control over placement, but information technology'southward a quick mode to copy objects. Notation that AutoCAD automatically copies objects from cartoon to drawing, so that you don't need to press Ctrl as yous drag.

To re-create, select the object or objects. Then click the object and hold downward the mouse button until you encounter the drag-and-drop cursor. The only gotcha is that y'all demand to make certain that you don't click on a grip, considering that will just make the grip hot.

And so drag the cursor to the other drawing and release the mouse push to place the object. You'll probably demand to suit the placement, using the Movement command, or by using grip-editing.

Desire more productivity tips like this? You tin can draw and edit faster and easier with this easy to follow top 25 productivity tips every AutoCAD user should know.

• Author
• Contempo Posts

Ellen Finkelstein is the writer of the best-selling AutoCAD & AutoCAD LT Bible, which started with R14. Ellen has written extensively on AutoCAD, including articles for Autodesk's website and features for AutoCAD'southward Help system. Ellen'southward get-go book was AutoCAD For Dummies Quick Reference.

DOWNLOAD HERE

Autocad How to Copy and Paste Between Drawings TUTORIAL

Posted by: dorothyarence.blogspot.com